Automotive Ethernet Test Plans
The test plans on this page may be downloaded and used for internal purposes only. The test plans may not be commercialized in any way without express permission of the UNH-IOL.
The Automotive Ethernet testing service currently offers the following test plans. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the Automotive Ethernet testing service.
When testing based on the following test plans is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using our document validation instructions.
IOL
Conformance
- Status
- Draft (Active)
- Revision
- v1.2
- Testing Days Needed
- 2 weeks
- Last Modified
- 2024-02-06
- Abstract
- Physical Media Attachment (PMA) conformance verification of 10BASE-T1S
- Status
- Fully Documented (Active)
- Revision
- Testing Days Needed
- Last Modified
- 2018-05-24
- Status
- Fully Documented (Active)
- Revision
- Testing Days Needed
- Last Modified
- 2019-02-11
- Status
- Fully Documented (Active)
- Revision
- Testing Days Needed
- Last Modified
- 2019-02-11
- Status
- Draft (Active)
- Revision
- 1.0
- Testing Days Needed
- 3 days
- Last Modified
- 2016-03-10
- Abstract
- These tests are designed to determine if a product conforms to specifications defined in IEEE 802.3 Physical Layer Transceiver Specification For Automotive Applications Standard. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the UNH-IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function properly in many 100BASE-T1 automotive environments.
- Status
- Under Development
- Revision
- 5.3
- Testing Days Needed
- 2 weeks
- Last Modified
- 2022-10-24
- Abstract
- This test suite deals with Reception issues such as CRC Errors, Framing Errors, Length Errors, Fragments, etc. as well as Transmission issues, proper spacing, proper preamble and SFD. For Half Duplex devices this also includes collisions, deference, etc. This suite of tests has been developed to help implementers evaluate the functioning of their Clause 4 Media Access Control (MAC) based products. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function well in most environments.
- Status
- Draft (Active)
- Revision
- v0.9
- Testing Days Needed
- 2 Weeks
- Last Modified
- 2023-05-02
- Abstract
- Physical Coding Sublayer (PCS) conformance verification of 10BASE-T1S
- Status
- Draft (Active)
- Revision
- 1.0
- Testing Days Needed
- 3 days
- Last Modified
- 2016-03-10
- Abstract
- This suite of tests has been developed to help implementers evaluate the functionality of their Clause 96 Physical Coding Sublayer (PCS) based products. The tests do not determine if a product conforms to IEEE 802.3 standard, nor are they purely interoperability tests. Rather, they provide one method to isolate problems within a PCS device. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the device under test (DUT) will function well in most environments.
- Status
- Fully Documented (Active)
- Revision
- 1.0
- Testing Days Needed
- Last Modified
- 2024-08-30
- Status
- Draft (Active)
- Revision
- Testing Days Needed
- Last Modified
- 2023-08-07
- Status
- Fully Documented (Active)
- Revision
- Testing Days Needed
- Last Modified
- 2023-08-07
- Status
- Draft (Active)
- Revision
- 1.0
- Testing Days Needed
- 3 days
- Last Modified
- 2016-03-10
- Abstract
- These tests are designed to determine if a product conforms to specifications defined in the IEEE 802.3 standard. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function properly in many 100BASE-T1 environments.
- Status
- Fully Documented (Active)
- Revision
- Testing Days Needed
- Last Modified
- 2023-08-07
- Status
- Draft (Active)
- Revision
- 0.1
- Testing Days Needed
- Last Modified
- 2019-01-25
- Abstract
- Current document available to Open Alliance members at this link: OPEN Alliance TC10 Sleep/Wake-up for 100BASE-T1
Key
| Fully Documented |
| Draft |